Djstorm100
Cast Iron
- Joined
- Jul 26, 2014
- Location
- Richmond
I currently have a vf2ss but needing more power, rigidity and just faster.
I'm limited on power at my panel, so something like the MP1000 TSC will not work.
What I have quoted so far:
560
RMP400
LNS NM250 conveyor
200psi TSC (looking at chip breaker 500psi too)
Koma RNE-200R
Reinshaw Gui interface
Reinshaw Inspection Plus (Haas has it and I do like it)
The gripes I've heard of is the flood with the nozzles all open is pretty lack-lustering. The chips collecting in the cutting area (alum is mostly what I cut)
I'm curious of the other issues that are the "cons" or "dislikes". I know it's a beast of a machine and a great one at that. Just wanting to making sure I'm dotting my I and crossing my T's.
I'm also looking at Doosan 4500s
I'm limited on power at my panel, so something like the MP1000 TSC will not work.
What I have quoted so far:
560
RMP400
LNS NM250 conveyor
200psi TSC (looking at chip breaker 500psi too)
Koma RNE-200R
Reinshaw Gui interface
Reinshaw Inspection Plus (Haas has it and I do like it)
The gripes I've heard of is the flood with the nozzles all open is pretty lack-lustering. The chips collecting in the cutting area (alum is mostly what I cut)
I'm curious of the other issues that are the "cons" or "dislikes". I know it's a beast of a machine and a great one at that. Just wanting to making sure I'm dotting my I and crossing my T's.
I'm also looking at Doosan 4500s