Hi everyone
I am a newbie trying hard to figure out what the heck is going on here. I have a cnc converted Sieg X2 mini mill with ball screws.
Here is the problem - I make a hole in a piece of aluminum (either drill or mill), then I try to indicate it with the micrometer, and the hole is off center by about 0.1 mm on Y axis and 0.5 mm on X axis.
I checked everything. Gibs are tightened, no play in anything. Backlash is compensated. Everything looks good.
It is driving me nuts, I am fighting with this piece of crap for a week, and no progress.
What can cause this weird thing?
Please!?
I am a newbie trying hard to figure out what the heck is going on here. I have a cnc converted Sieg X2 mini mill with ball screws.
Here is the problem - I make a hole in a piece of aluminum (either drill or mill), then I try to indicate it with the micrometer, and the hole is off center by about 0.1 mm on Y axis and 0.5 mm on X axis.
I checked everything. Gibs are tightened, no play in anything. Backlash is compensated. Everything looks good.
It is driving me nuts, I am fighting with this piece of crap for a week, and no progress.
What can cause this weird thing?
Please!?