Greco Systems CNC Station to Meldas 320M Help

Hardplates · Oct 5, 2019

I have a Greco CNC Station that I upgraded from 3.5" floppy to USB. I would like to use this to drip feed my OKK PCV-40 rather than using a laptop like I am now. The page on the left show the machine manual and the page on the right is the Greco manual. Can anyone make sense of this as to how I need to solder up a RS-232 cable? Don't pay attention to the redlining on the pages, the machine manual was marked up by ghosts of mechanics past and the Greco manual was me scribbling how I have the laptop hooked up.

Hardplates · Oct 5, 2019

For future reference and incase anyone needs to do a similar setup, the way I have it drawn on the Greco page works if done to both end of the cable. #10 Fanuc 7E2 9600 Auto Enable: ON for handshake.

BTW it cost me about $25 to upgrade the Greco floppy to USB.

Search

Largest Manufacturing Technology Community on the Web

Search

Greco Systems CNC Station to Meldas 320M Help

Hardplates

Stainless

Attachments

Hardplates

Stainless

Attachments

Similar threads