I am slowly getting my cnc lathe up and running as I have time. I need to get an air dryer before I feel comfortable running production.
I havent had a chance to power it up yet, but I just have to get a few more feet of wire. I have 208v 3 phase, I might need to bump it to 230v but I think I might be able to get it fired up without a transformer.
I got this machine with the intention of running an LNS Eco Load Bar feeder. I have seen them on these machines in the past and I have a customer that has at least 1 of them in house that I can use for troubleshooting.
I do not know much about the barfeeder hooking up to the machine. What I have read about them makes sense.
Here are a few pics of the connections available at the machine. Inside there is a note saying SMW E-Stop.
I feel like this machine is all set up for a bar feeder but I do not know if I have extra connections or if they are for 2 different bar feeders. The Eco Load that I have seen has the 2 round connections. I have also seen pics of ones with the vertical type connections above the round ones.
If anyone can walk me through setting this up I would appreciate it (search function shows Ox has/had this same setup). I dont have the bar loader yet, want to make sure I get the right one.
I got a smartphone yesterday and can now take pics. I can show off my work a little more now. Let me know if you need to see anything else.
Thanks,
Dan
Barfeed-Interface-Power-Line — ImgBB
Barfeed-Interface-E-Stop — ImgBB
Barfeed-Interface-Connectors — ImgBB
I havent had a chance to power it up yet, but I just have to get a few more feet of wire. I have 208v 3 phase, I might need to bump it to 230v but I think I might be able to get it fired up without a transformer.
I got this machine with the intention of running an LNS Eco Load Bar feeder. I have seen them on these machines in the past and I have a customer that has at least 1 of them in house that I can use for troubleshooting.
I do not know much about the barfeeder hooking up to the machine. What I have read about them makes sense.
Here are a few pics of the connections available at the machine. Inside there is a note saying SMW E-Stop.
I feel like this machine is all set up for a bar feeder but I do not know if I have extra connections or if they are for 2 different bar feeders. The Eco Load that I have seen has the 2 round connections. I have also seen pics of ones with the vertical type connections above the round ones.
If anyone can walk me through setting this up I would appreciate it (search function shows Ox has/had this same setup). I dont have the bar loader yet, want to make sure I get the right one.
I got a smartphone yesterday and can now take pics. I can show off my work a little more now. Let me know if you need to see anything else.
Thanks,
Dan
Barfeed-Interface-Power-Line — ImgBB
Barfeed-Interface-E-Stop — ImgBB
Barfeed-Interface-Connectors — ImgBB