hardinge superslant with gn fanuc 6tc control m code for bar feed air
Close
Login to Your Account
Likes Likes:  0
Results 1 to 2 of 2
  1. #1
    Join Date
    Jan 2019
    Country
    UNITED STATES
    State/Province
    Louisiana
    Posts
    1
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default hardinge superslant with gn fanuc 6tc control m code for bar feed air

    I am looking for someone who has connected a barfeed to a hardinge superslant lathe with gn6tc control using an m code to control the air to the bar feed.is there a way to add an m code to the control? the manual has reference to a m20
    but it does not work.I am presently using the parts catcher
    valve output for the air,but it takes a few seconds to work.
    any suggestions would be appreciated.

  2. #2
    Join Date
    Jan 2019
    Country
    UNITED STATES
    State/Province
    Missouri
    Posts
    86
    Post Thanks / Like
    Likes (Given)
    23
    Likes (Received)
    10

    Default

    I think it says in the manual
    "the barfeed signal is internally decoded, but external drivers are not supplied for it"


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •