Freakingreen
Plastic
- Joined
- Jan 29, 2015
I have a new to me 2002 Hardinge vmc 1000 11 with Siemens 810D control. Current issue is that when requesting a tool change from the Shop Mill T,S,M page the spindle will put the in spindle tool into the carousel but after the carousel indexes for the next tool the spindle does not descend to pick up the new tool.
The control flashes:-
Wait: read-in enable missing
And
waiting: aux. Functional. Act. Missing
It does not produce an error code or an alarm.
I checked for debris in the limit switch on the z axis column but found nothing. Only one limit switch to indicate tool change position.
Does anyone know what I'm missing?
The control flashes:-
Wait: read-in enable missing
And
waiting: aux. Functional. Act. Missing
It does not produce an error code or an alarm.
I checked for debris in the limit switch on the z axis column but found nothing. Only one limit switch to indicate tool change position.
Does anyone know what I'm missing?