macds
Hot Rolled
- Joined
- Jul 24, 2008
- Location
- Milverton, Ontario, Canada
I have 2 Fadals here, each with a 4th. One is a large Koma unit, the other the smaller fadal one (6")
Cash is a little tight, and I have some spare time.
Im thinking about making a trunnion for the Koma, and mounting the 6" Fadal rotary on it.
Use this setup as a 5 axis.
All I'd need is an additional wiring harness. I have a spare amp here, and just switch the axis card from one machine over.
I dont see why this wouldnt work, so long as I can set rotary ratio parameters correctly.
Opinions?
Cash is a little tight, and I have some spare time.
Im thinking about making a trunnion for the Koma, and mounting the 6" Fadal rotary on it.
Use this setup as a 5 axis.
All I'd need is an additional wiring harness. I have a spare amp here, and just switch the axis card from one machine over.
I dont see why this wouldnt work, so long as I can set rotary ratio parameters correctly.
Opinions?