Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
Help advice with old anilam 1100 problem
- Thread starter MOREBOOST
- Start date
- Replies 9
- Views 3,992
Blakews2217
Plastic
- Joined
- Mar 30, 2018
Looks like the bios battery went low. I do a lot of computer and IT stuff, but never the bios in a machine. I wonder how close it is to the normal computer.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Blakews2217
Plastic
- Joined
- Mar 30, 2018
That I’m not sure, but it’s probably year dependent. We have anilam 6000 controls and we haven’t had an issue with the bios yet. I’d ask someone with more experience.
Getting back with my dad, who owns the shop, he said” replace the cmos battery, reboot, when it comes up, select write to cmos and exit. I don’t think you need to do anything special or specific, but look around to make sure.”
The last few words are him basically saying that here’s what he would do if it were his machine.
Good luck
Sent from my iPhone using Tapatalk
I have a 3000m, the battery on mine was on a computer board in the console, pretty easy to get to. It’s the round silver thing under the red,black, and yellow wires(partly hidden under the foam on the retaining bar
Yours is older, not sure how similar
Sent from my iPhone using Tapatalk Pro
Yours is older, not sure how similar
Sent from my iPhone using Tapatalk Pro
Before you change anything, just eneter the time and date and exit BIOS, if its just a low clock battery machine will run fine till its next power down were you then get the same fault as it has lost track of time, pretty sure if its running a bios like that it has a solid state or hard disk for memory, so you should not have parameter issues at least with a anilam control.
Jerry Bouvier Jr
Plastic
- Joined
- Aug 8, 2018
- Location
- Jamestown, NY, USA.
I can help you. I need to send you some photos of the different cpu boards used in the 1100 series cnc.
Please send me an e-mail to [email protected].
I worked for Anilam for 37 years.
I now own my own business.
JB CNC Repair, LLC.
cell # 716-490-1462.
Please send me an e-mail to [email protected].
I worked for Anilam for 37 years.
I now own my own business.
JB CNC Repair, LLC.
cell # 716-490-1462.
alphonso
Titanium
- Joined
- Feb 15, 2006
- Location
- Republic of Texas
Nobody knows more about Anilam than Jerry. Saved my ass more than once.
If you need help with the Anilam 6000, I work on those. 845-546-5165
Similar threads
