I have been asked to quote on some large (Ø36.7" OD x Ø33" ID x 130" Long) bronze liners by our customer, this is not a common material to us and not much experience in machining and I am wondering if someone could point me in the right direction for typical cutting speed and feed.
Customer is looking for 2 quotes, one from Grade BS EN 1982-2008 CC492K and one from ASTM B271 Grade 92200, I have no idea if any discernible difference between the two from a machining standpoint.
Not a huge amount of material coming off (around 0.2" per side)but due to the size of the parts I`d appreciate any advice you can offer.
Thanks
Harry
Customer is looking for 2 quotes, one from Grade BS EN 1982-2008 CC492K and one from ASTM B271 Grade 92200, I have no idea if any discernible difference between the two from a machining standpoint.
Not a huge amount of material coming off (around 0.2" per side)but due to the size of the parts I`d appreciate any advice you can offer.
Thanks
Harry