msayani2
Plastic
- Joined
- Feb 9, 2015
- Location
- United Arab Emirates
We are looking into high feed cutters for our CNC mills.
Just wanted to get feedback from guys who have experience with atleast 2 or all 3 of these brands.
1. Dijet SKS (3 edge insert type)
2. Sandvik R419 [ R210 takes up too much power in some machines and is harsh in our experience ]
3. Walter F4030
We mostly cut AISI 4140 80ksi or 4330V (30Hrc). Machines vary from 40 taper to 50 taper machines.. will put 1.5" or 2" cutters in the 40 taper and 2.5 or 3" cutters in the 50 taper machines.
Need to select one of the 3 above.
Thanks.
Just wanted to get feedback from guys who have experience with atleast 2 or all 3 of these brands.
1. Dijet SKS (3 edge insert type)
2. Sandvik R419 [ R210 takes up too much power in some machines and is harsh in our experience ]
3. Walter F4030
We mostly cut AISI 4140 80ksi or 4330V (30Hrc). Machines vary from 40 taper to 50 taper machines.. will put 1.5" or 2" cutters in the 40 taper and 2.5 or 3" cutters in the 50 taper machines.
Need to select one of the 3 above.
Thanks.