dstryr
Diamond
- Joined
- Jan 22, 2010
- Location
- Nampa Idaho
I have a production part we make and the volumes just went 5x
Have 2 areas on the part that get bearings with this tolerance. We have made 1000s of these on the doosan lynx but only two of us can accurately measure and make them.
We are looking into adding a renishaw probe, rough the diameter, finish .001 larger, probe, recut.
The machine moves about .001 over the course of a day in thermal growth... very predictable
So anyone out here having good luck with this process? Looking at adding a coolant chiller at the same time as well.
*In before 2outof3 tries to sell me yet Another new machine LOL
Have 2 areas on the part that get bearings with this tolerance. We have made 1000s of these on the doosan lynx but only two of us can accurately measure and make them.
We are looking into adding a renishaw probe, rough the diameter, finish .001 larger, probe, recut.
The machine moves about .001 over the course of a day in thermal growth... very predictable
So anyone out here having good luck with this process? Looking at adding a coolant chiller at the same time as well.
*In before 2outof3 tries to sell me yet Another new machine LOL