markp
Hot Rolled
- Joined
- Oct 7, 2006
- Location
- Petaluma CA 94952
Trying to set up and load tools on my new to me DMC103V with 840D control and between the DMG manual, and the 840D manual am missing something. I can describe and load tools in the tool magazine but cant call them from MDI. I get a 171090 error but me error manual does not explain what that error means.
I see reference in the manuals to "activating" a tool and stuff like "duplo" values but no explanation of what those terms mean that I could find. Never seen a more needlessly complicated system for tool data entry in my 20 years using cnc. Heres what my tool table looks like after tool data is entered.
Does anyone with one of these know of a basic procedure for doing this?
I see reference in the manuals to "activating" a tool and stuff like "duplo" values but no explanation of what those terms mean that I could find. Never seen a more needlessly complicated system for tool data entry in my 20 years using cnc. Heres what my tool table looks like after tool data is entered.
Does anyone with one of these know of a basic procedure for doing this?