Hammerbot
Plastic
- Joined
- Jan 4, 2010
- Location
- Michigan, USA
We are resurrecting an old mill that was mothballed 10 years ago. A Hurco / MHP-5K
I have been working through issues as they come up, but the one I can't figure is this:
How do I manually jog the machine once I have run over-limit and tripped the limit switch?
Attached is a photo of the control panel to show what button options I have.
Tried holding the Blue button down and jogging with no luck.
I cant find an easy way to manually move the bed (currently locked on the Y-axis) short of channel locks on the lead screw. Probably a last resort... probably...
Anyone find a version of the manual for the Dynapath Delta on the interweb?
Any help would be appreciated. Thanks, Tim
I have been working through issues as they come up, but the one I can't figure is this:
How do I manually jog the machine once I have run over-limit and tripped the limit switch?
Attached is a photo of the control panel to show what button options I have.
Tried holding the Blue button down and jogging with no luck.
I cant find an easy way to manually move the bed (currently locked on the Y-axis) short of channel locks on the lead screw. Probably a last resort... probably...
Anyone find a version of the manual for the Dynapath Delta on the interweb?
Any help would be appreciated. Thanks, Tim