carl laniak
Aluminum
- Joined
- Dec 27, 2012
- Location
- South Carolina, United States
Hi everyone,
Hopeful that someone here can either send me in the right direction or help me figure out what to do.
I left this machine off for a long while and upon restarting I'm having issues with the turret indexing.
I've done plenty of reading on threads of other machines, and it appears that each MTB has their own procedure to reference a turret servo/amp after a dead battery situation.
Best option is someone who can tell me the procedure for my particular machine...I've e-mailed a Hyundai customer support address I found through google, but no response yet...not even sure if they'll reply or be familiar with my machine.
I realize if I was a bit better educated on the topic, I could figure it out based on the ladder logic... I am familiar enough to try.....but dangerous enough to spend hours and get nowhere. or worse.
I see the Zero Return - Unclamp - and Forward Switch here on the ladder, but I don't know what MD4 is, or, really anything else about what to do with this...
I've actually gotten it to index inconsistently, but I can't figure out exactly what works and what doesn't...
G50 T0101;
seems to temporarily give it life, but funky things occur after that....ie calling a tool change unclamps the chuck!?
I am imagining I need to alter a parameter to let it know where it is, and then do some combination of shutdown/restart and press some specific keys.
Thanks to anyone who either knows the answer or can spoon feed me the steps to figure it out myself
Carl
Hopeful that someone here can either send me in the right direction or help me figure out what to do.
I left this machine off for a long while and upon restarting I'm having issues with the turret indexing.
I've done plenty of reading on threads of other machines, and it appears that each MTB has their own procedure to reference a turret servo/amp after a dead battery situation.
Best option is someone who can tell me the procedure for my particular machine...I've e-mailed a Hyundai customer support address I found through google, but no response yet...not even sure if they'll reply or be familiar with my machine.
I realize if I was a bit better educated on the topic, I could figure it out based on the ladder logic... I am familiar enough to try.....but dangerous enough to spend hours and get nowhere. or worse.
I see the Zero Return - Unclamp - and Forward Switch here on the ladder, but I don't know what MD4 is, or, really anything else about what to do with this...
I've actually gotten it to index inconsistently, but I can't figure out exactly what works and what doesn't...
G50 T0101;
seems to temporarily give it life, but funky things occur after that....ie calling a tool change unclamps the chuck!?
I am imagining I need to alter a parameter to let it know where it is, and then do some combination of shutdown/restart and press some specific keys.
Thanks to anyone who either knows the answer or can spoon feed me the steps to figure it out myself
Carl