I need technical support for Deckel FP50CC
Close
Login to Your Account
Likes Likes:  0
Results 1 to 3 of 3
  1. #1
    Join Date
    Dec 2013
    Location
    Egypt
    Posts
    2
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default I need technical support for Deckel FP50CC

    Machine Type: FP50CC



    Serial Number: 2813-0234



    The problem is as follow:



    When the system starts, the sequence of starting runs normally and then it finally gives the indicated status in attachments.

    Pushing green control ON button in the operator panel has no effect i.e. (drives not start), the machine then gives no error messages and no alarms as indicated in attachment "monitor1.jpg". But the abnormal behavior is that after the sequence of starting is finished:

    The (READY) led in the NPC card is ON whereas the (RUN) led in this card is OFF as indicated in attachment "Dialog11.jpg"
    The (CNC) led in the NSV card is OFF as indicated in attachment "Dialog11.jpg"
    Please give help to fix this problem

    Aiman Ebraheemdialog11.jpgmonitor1.jpgmonitor2.jpgpanel.jpg

  2. #2
    Join Date
    Dec 2013
    Location
    Egypt
    Posts
    2
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default waiting for help

    Please give help

  3. #3
    Join Date
    Feb 2001
    Location
    Redwood City, CA USA
    Posts
    5,223
    Post Thanks / Like
    Likes (Given)
    223
    Likes (Received)
    1077

    Default

    Aiman,

    Unfortunately, there are very few people on PM who know about the Dialog 11. I was not even aware that Dialog 11 overlapped with DMG as opposed to Deckel alone. There are some Dialog 11 posts by Milacron (site owner) about his troubleshooting a Dialog 11 machine. Your best hope is to have two machines so you can swap boards between them. Go to Google and search the following exactly as typed here: "Dialog 11" site:practicalmachinist.com

    RKlopp


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •