Leblond Makino Baron 25

I have an electrical problem and don't know anyone close to me (near Ocean City Maryland) that I can get in to look at the machine. It started with not completly powering up the control station, I may have to basicly reboot the control to get complete power to the control. This progressed to a shut down of the control station while the machine was running. Now it will not power the control station at all, once the computer goes thru its diagnostic test it is supposed to energize a switch and give power to the control. What happens now is one magnetic switch energizes for a second and then turns off followed by the switch that give powere to the hydraulics and most of the machine will trip in about 30 sec. I would guess I have a short somewhere but have no idea where to look. Anybody got any ideas? or know someone that isn't 5 hours away. Thanks in advance.