Looking for ideas for a custom mill enclosure

Looking to see if anyone out there has any photos or input on a custom coolant enclosure they rigged up for a mill. I have a couple of Milltronics RH20’s from the early 2000’s. I’ve grown tired of watching the coolant be blown all over the place. The RH20 from that era has a partial enclosure that travels with the table. It catches some but the splatter from the spinning tool and the excess running over the table is enough to soak a decent area on the floor. We have 1/4” plastic sheet propped up by a couple buckets on each side of the table to catch what we can but i would like to improve it. I have some ideas but was looking to see if anyone else came up with something or wish they did something different.

Thanks,
Pat

This is really prob not helpful, but on my open machine I switched to mql and very happy to get rid of flood altogether. Might be worth looking at. It’s a lot cleaner at least. Sorry I don’t have any pictures of hat your actually asking for.
Thanks