We have 2 Mori Seiki SL-300 lathes with an MSD-501 control. I believe it's a Yasnac.
We turn longer shafts quite often with a ton of different diameters and undercuts.
Unfortunately this control limits us to 30 shape changes (blocks) per toolpath.
Does anyone know if this was an option to allow more? Or is this a parameter change?
We turn longer shafts quite often with a ton of different diameters and undercuts.
Unfortunately this control limits us to 30 shape changes (blocks) per toolpath.
Does anyone know if this was an option to allow more? Or is this a parameter change?