Hey Guy's
I've recently aquired a older Hardinge conquest 42 . It did not come with any documentation . You helped me get the machine homed out and it seems like evrey thing will work . However this is the first machine I've owned with live tools and with out a programming manual I am lost . I found an operator manual for an 18T control but nothing for the O T . I have a Fanuc book for a OT-B but the G and M codes appear to be different . I can muddle through with the operator manual But at a minimum a list of G & M codes would be helpful . It used to be tech support from Hardinge was 2nd to none but lately it makes me wonder why I brought one. Thanks in advance.
Pete
I've recently aquired a older Hardinge conquest 42 . It did not come with any documentation . You helped me get the machine homed out and it seems like evrey thing will work . However this is the first machine I've owned with live tools and with out a programming manual I am lost . I found an operator manual for an 18T control but nothing for the O T . I have a Fanuc book for a OT-B but the G and M codes appear to be different . I can muddle through with the operator manual But at a minimum a list of G & M codes would be helpful . It used to be tech support from Hardinge was 2nd to none but lately it makes me wonder why I brought one. Thanks in advance.
Pete