jdgarner13
Plastic
- Joined
- Nov 7, 2014
Good afternoon Gents,
My maintenance team I have been all over this mill trying to figure out what is wrong.
The machine was last ran Friday evening without any cause of alarm. When we fired it up Monday morning nothing would move. Not X, Y, Z, or B axis. The initial dialog box in the ATC screen said the touch probe was not down. We corrected that and still no movement. We went through the I/O pages, checked all pressures, made sure all our sequences were at the starting points, and nothing. I can switch the system check monitor to 1 and move everything. When we try to start the program we get this alarm and code.
1703-03 Alarm-A AXIS interlock Z-AXIS 3BE2
Has anyone dealt with this? Can anyone explain how to use the hexadecimal also?
My maintenance team I have been all over this mill trying to figure out what is wrong.
The machine was last ran Friday evening without any cause of alarm. When we fired it up Monday morning nothing would move. Not X, Y, Z, or B axis. The initial dialog box in the ATC screen said the touch probe was not down. We corrected that and still no movement. We went through the I/O pages, checked all pressures, made sure all our sequences were at the starting points, and nothing. I can switch the system check monitor to 1 and move everything. When we try to start the program we get this alarm and code.
1703-03 Alarm-A AXIS interlock Z-AXIS 3BE2
Has anyone dealt with this? Can anyone explain how to use the hexadecimal also?