I was given an opportunity to do a job in my home shop, outsourced from the shop i work for, because theyre swamped right now and my boss is kind enough to give me some work here and there, it benefits both of us.
The job is simple, I need to square up 1000 pieces of D2, +/- .001, with a perpendicularity tolerance of .001" on four sides.
now my question is what is the most efficient way to do this without a ton of consumables? removing about .05" of material per side
ive got a CNC mill and one vise. currently I'm using a 2" APMT face mill.
thanks in advance for your input
The job is simple, I need to square up 1000 pieces of D2, +/- .001, with a perpendicularity tolerance of .001" on four sides.
now my question is what is the most efficient way to do this without a ton of consumables? removing about .05" of material per side
ive got a CNC mill and one vise. currently I'm using a 2" APMT face mill.
thanks in advance for your input