Here is my problem. I want to use the machines programming and not any kind of cam for the part.
Part is 5” Id 10” od 2.5” thick. I wanna take a 3/4” helimill at 7.5”. The center of the tool will be at 7.5”.
I want to ramp it down to a depth of 1.25”. So start at .01 above zero and as the chuck slowly spins move it down. So each rev off the chuck it should drop down .100.
How can I do this with the machines programmming?
I know they make tools to face groove but that is not an option right now.
Thanks!
Part is 5” Id 10” od 2.5” thick. I wanna take a 3/4” helimill at 7.5”. The center of the tool will be at 7.5”.
I want to ramp it down to a depth of 1.25”. So start at .01 above zero and as the chuck slowly spins move it down. So each rev off the chuck it should drop down .100.
How can I do this with the machines programmming?
I know they make tools to face groove but that is not an option right now.
Thanks!