Hi guys,
Helping a customer out here. They have a Quick Tech CNC Machining Centre running Syntec 900ME controller. I have a known working cable and computer, but I cannot communicate with the machine.
I am using a USB to RS232 adaptor, into a 9 pin to 25 pin cable, into the machine. The same setup communicates with a Mitsubishi controlled lathe no problem.
Does anyone know what RS232 comm settings I should set the machine to ? I have tried a bunch of different settings including baud rates, parity settings, handshake etc to no avail. Obviously I am matching the settings on the computer side of things too. Any help greatly appreciated. Thanks.
Helping a customer out here. They have a Quick Tech CNC Machining Centre running Syntec 900ME controller. I have a known working cable and computer, but I cannot communicate with the machine.
I am using a USB to RS232 adaptor, into a 9 pin to 25 pin cable, into the machine. The same setup communicates with a Mitsubishi controlled lathe no problem.
Does anyone know what RS232 comm settings I should set the machine to ? I have tried a bunch of different settings including baud rates, parity settings, handshake etc to no avail. Obviously I am matching the settings on the computer side of things too. Any help greatly appreciated. Thanks.