mattdlr
Plastic
- Joined
- Jul 18, 2018
- Location
- Leicestershire, UK
Edit: I meant to write "Siemens 810D Control" in title. Doesn't look like it's possible to edit titles.
Hi All
New to post here but been here for a while.
For a while now I've been trying to workout if there is a GCode line I can use to set the work offset with ShopTurn on a Siemens 810D control (the machine is a Hardinge).
I've googled it and read some manuals but could never get it to work. I want to just add a line at the top of the program to set the G54 for each program.
For example I'd like to set the Z G54 work offset to 100mm.
In normal gcode that would be something like "G10 L2 P1 G90 Z100.0" I can't get this to work with this control though. Does any one have experience with ShopTurn/Siemens controls?
I'm sure it must be something simple.
Thanks in advance
Hi All
New to post here but been here for a while.
For a while now I've been trying to workout if there is a GCode line I can use to set the work offset with ShopTurn on a Siemens 810D control (the machine is a Hardinge).
I've googled it and read some manuals but could never get it to work. I want to just add a line at the top of the program to set the G54 for each program.
For example I'd like to set the Z G54 work offset to 100mm.
In normal gcode that would be something like "G10 L2 P1 G90 Z100.0" I can't get this to work with this control though. Does any one have experience with ShopTurn/Siemens controls?
I'm sure it must be something simple.
Thanks in advance
Last edited: