Ox
Diamond
- Joined
- Aug 27, 2002
- Location
- Northwest Ohio
810D Mill control
2002 vintage
Had CCU issues and tried to swap with sister machine, but the CCU's were slightly different. When I threw the juice to the machine - I think that I may have heard something pop?
Swapped CCU's back and the sister machine is fine, and with phone/e-mail support from a technician, we were able to get our CCU back to what appears to be fine, however - our PCU50 is not loading completely.
The tech thinks corrupt file maybe - but that is just outside of his wheelhouse apparently.
He has a used unit to sell me tho.
However - my boy - being a 'putor programmer by trade was able to pull the hard drive off and download it - hoping to find corruption in the DINO file, but he said that it appears fine from what he can see.
I hadn't thought until posting this about the possible "pop" issue.* Have not ran that past the tech yet. But we are under the assumption that this file should be loading just to the HMI or whatnot - and not down to the CCU?
Maybe the issue is on the board of the HMI unit?
We get quite a ways into the boot process, just not finishing.
Any experience?
edit:
IF this 'pop" actually did exist, I think that it came from inside the cabinet. It did not sound like it was coming from inside the pendant. (if it ever actually existed)
-----------------------
Think Snow Eh!
Ox
2002 vintage
Had CCU issues and tried to swap with sister machine, but the CCU's were slightly different. When I threw the juice to the machine - I think that I may have heard something pop?
Swapped CCU's back and the sister machine is fine, and with phone/e-mail support from a technician, we were able to get our CCU back to what appears to be fine, however - our PCU50 is not loading completely.
The tech thinks corrupt file maybe - but that is just outside of his wheelhouse apparently.
He has a used unit to sell me tho.
However - my boy - being a 'putor programmer by trade was able to pull the hard drive off and download it - hoping to find corruption in the DINO file, but he said that it appears fine from what he can see.
I hadn't thought until posting this about the possible "pop" issue.* Have not ran that past the tech yet. But we are under the assumption that this file should be loading just to the HMI or whatnot - and not down to the CCU?
Maybe the issue is on the board of the HMI unit?
We get quite a ways into the boot process, just not finishing.
Any experience?
edit:
IF this 'pop" actually did exist, I think that it came from inside the cabinet. It did not sound like it was coming from inside the pendant. (if it ever actually existed)
-----------------------
Think Snow Eh!
Ox