SwiftDesignworks
Plastic
- Joined
- Aug 17, 2019
Hey all,
I have a few runs of parts (6061)I need to machine on my Brother with a Yukiwa 4th.
They will require (for my sanity in minimizing setups) 3ops with a 4th for the first 2.
Instead of making a fixture using pitbulls I've been really tempted to get a small dovetail vise
Looking at the following:
Kurt Dt20
5th Axis d115
Raptor RWP-001
My stock is 1.5"x2.25"x3.5" for one part and 1.5"x3"x4.5" for the second part and the vise needs to clamp across the 1.5" face, hence the size on my vise interests.
Any feedback on these, or should I be looking at any others?
Thanks!
I have a few runs of parts (6061)I need to machine on my Brother with a Yukiwa 4th.
They will require (for my sanity in minimizing setups) 3ops with a 4th for the first 2.
Instead of making a fixture using pitbulls I've been really tempted to get a small dovetail vise
Looking at the following:
Kurt Dt20
5th Axis d115
Raptor RWP-001
My stock is 1.5"x2.25"x3.5" for one part and 1.5"x3"x4.5" for the second part and the vise needs to clamp across the 1.5" face, hence the size on my vise interests.
Any feedback on these, or should I be looking at any others?
Thanks!