I just wasn't sure where to post this info so hopefully you'll find it if you're looking for it.
With all the issues I've seen about soft limit alarms and how to clear them this is what I learned from an old tech friend of mine. And it worked for me.
On my old Kitamura MyCenter 1B with a 10m Fanuc Control, I have used this procedure to clear the register.
Machine over-travel will give you this alarm:
0T001 OT Soft Limit
So shut 'OFF' the Main Power on the machine
Then turn the Main Power back 'ON'
Then Press & Hold the 'decimal point' AND the 'minus' at the same time holding them while you turn 'ON' the CONTROL POWER. Then release the 'decimal and minus' buttons
You will get a list on the screen of 1-6
Choose 4 and press 'Input'
Then press 'N' (just 'N' DO NOT press Input, not not not)
Then press '6' 'Input'
This should clear out the register and you can 'Home' the machine
Hope this helps
With all the issues I've seen about soft limit alarms and how to clear them this is what I learned from an old tech friend of mine. And it worked for me.
On my old Kitamura MyCenter 1B with a 10m Fanuc Control, I have used this procedure to clear the register.
Machine over-travel will give you this alarm:
0T001 OT Soft Limit
So shut 'OFF' the Main Power on the machine
Then turn the Main Power back 'ON'
Then Press & Hold the 'decimal point' AND the 'minus' at the same time holding them while you turn 'ON' the CONTROL POWER. Then release the 'decimal and minus' buttons
You will get a list on the screen of 1-6
Choose 4 and press 'Input'
Then press 'N' (just 'N' DO NOT press Input, not not not)
Then press '6' 'Input'
This should clear out the register and you can 'Home' the machine
Hope this helps