e30ryan
Aluminum
- Joined
- Oct 26, 2016
- Location
- Ontario, Canada
Hello all,
I'm looking for any recommended shops servicing the southern Ontario region for a spindle rebuild. It's a BT40 from a First MCV300 (7.5 HP). The machine in general is fairly sound but I've got too much deflection in the spindle (when measured between the spindle housing and spindle nose). Runout is ok (~0.0002"), but the whole thing deflects a few thou when I grab on the tool holder!
Cheers
I'm looking for any recommended shops servicing the southern Ontario region for a spindle rebuild. It's a BT40 from a First MCV300 (7.5 HP). The machine in general is fairly sound but I've got too much deflection in the spindle (when measured between the spindle housing and spindle nose). Runout is ok (~0.0002"), but the whole thing deflects a few thou when I grab on the tool holder!
Cheers