Taper in taper thread

[M Code]

Hi

If it mentioned the taper thread has 2" taper .. what is it meaning for?

Thanks..........

 

[RJT]

2 inch tapered pipe thread?

 

[M Code]

2 inch tapered pipe thread?

It mentioned

TPI= 8
Taper = 2"

 

[modelmakerblue]

Hi

If it mentioned the taper thread has 2" taper .. what is it meaning for?

Thanks..........

Ask the customer
Tony

 

[M Code]

Is it the horizontal distance between the big and small diameters?

 

[kenton]

It most likely means they didn't give you enough information.

If the call out said 2" NPT or 2-11.5 NPT they are looking for a 2 inch pipe thread, which has an actual major diameter of 2.375 inches.

National pipe thread - Wikipedia

 

[M Code]

It most likely means they didn't give you enough information.

If the call out said 2" NPT or 2-11.5 NPT they are looking for a 2 inch pipe thread, which has an actual major diameter of 2.375 inches.

National pipe thread - Wikipedia

this is very helpful like ... thank you so much