snowshooze
Stainless
- Joined
- Sep 15, 2010
- Location
- Anchorage, Alaska, USA
Hi guys...
I am wondering if there are undersize taps.
Like a h-2
I want to tap a hole, and have to force a set screw in there.
Can't use lock-tite as temperatures will soak at 400F +
In Aluminum. 5/16 coarse.
Maybe I should just take my roll tap and top it on the grinder for interference...
Set screw goes into assembly, to remain there forever...
I am also wondering if I salted the steel set screw, if it would real quick seize up in position.
Thanks,
Mark
I am wondering if there are undersize taps.
Like a h-2
I want to tap a hole, and have to force a set screw in there.
Can't use lock-tite as temperatures will soak at 400F +
In Aluminum. 5/16 coarse.
Maybe I should just take my roll tap and top it on the grinder for interference...
Set screw goes into assembly, to remain there forever...
I am also wondering if I salted the steel set screw, if it would real quick seize up in position.
Thanks,
Mark