implmex
Diamond
- Joined
- Jun 23, 2002
- Location
- Vancouver BC Canada
Hi All:
Recently I posted my first impressions of Frank Mari's new shanked down cutters.
Well here's another job I just happen to be running right now that shows one of their best strengths.
So the cutter is a 1/4" bullnose with 0.020" corner rad, running on a manual Bridgeport clone, milling 360 brass 1.2" deep.
The picture shows perfectly how the shank is cleared.
Ran like a bunny and did a great job on the sidewalls.
I'm a happy guy!
Cheers
Marcus
Implant Mechanix • Design & Innovation > HOME
Vancouver Wire EDM -- Wire EDM Machining
Recently I posted my first impressions of Frank Mari's new shanked down cutters.
Well here's another job I just happen to be running right now that shows one of their best strengths.
So the cutter is a 1/4" bullnose with 0.020" corner rad, running on a manual Bridgeport clone, milling 360 brass 1.2" deep.
The picture shows perfectly how the shank is cleared.
Ran like a bunny and did a great job on the sidewalls.
I'm a happy guy!
Cheers
Marcus
Implant Mechanix • Design & Innovation > HOME
Vancouver Wire EDM -- Wire EDM Machining