ManualEd
Stainless
- Joined
- Oct 13, 2014
- Location
- Kelowna, Canada
They seem to be a Taiwanese-built offshoot of Toyoda.
Is an AA1165 with Fanuc 31i comparable to any of the Japanese c-frame mills? Or is it similar to Haas in rigidity and power?
X-axis 43”,
Y-axis25.6”,
Z-axis 23.6”,
BOX ways on all axes,
20/25hp,
CAT 40 taper,
15,000rpm DDS spindle,
32 ATC,
coolant through spindle,
Fanuc 31i control with 600 block look ahead,
2,400lbs table capacity
Max cutting rate 393"/min
They don't look very common, and I don't think I've seen them talked about on here, aside from one or two old threads.
Thanks!
Is an AA1165 with Fanuc 31i comparable to any of the Japanese c-frame mills? Or is it similar to Haas in rigidity and power?
X-axis 43”,
Y-axis25.6”,
Z-axis 23.6”,
BOX ways on all axes,
20/25hp,
CAT 40 taper,
15,000rpm DDS spindle,
32 ATC,
coolant through spindle,
Fanuc 31i control with 600 block look ahead,
2,400lbs table capacity
Max cutting rate 393"/min
They don't look very common, and I don't think I've seen them talked about on here, aside from one or two old threads.
Thanks!