I'm working on an older Kasuga Quantum VMC with Fanuc 18 controller. Working toward using Dnc4U and Fusion360 for more complex parts. I have the Dnc4U communicating with the Fanuc controller, programs send to the machine just fine, but punch back as a single line without any LF/CR formatting.
I downloaded the Fanuc Parameter Manual, and looking at the parameter explanations, it appears that I may have some inconsistency in the ISO vs EIA character set and parity/stop bit parameters.
I want to be sure that I'm not messing with any parameter that effects the function of the machine, that these are communications protocol only.
I have a cable with line 4-5 looped together and line 6-8-20 looped together.
I downloaded the Fanuc Parameter Manual, and looking at the parameter explanations, it appears that I may have some inconsistency in the ISO vs EIA character set and parity/stop bit parameters.
I want to be sure that I'm not messing with any parameter that effects the function of the machine, that these are communications protocol only.
I have a cable with line 4-5 looped together and line 6-8-20 looped together.