Deckel Dialog 11 FP50CC/T SPS error code on startup - Page 2
Close
Login to Your Account
Page 2 of 2 FirstFirst 12
Results 21 to 31 of 31
  1. #21
    Join Date
    Sep 2019
    Country
    SLOVENIA
    Posts
    6
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default

    Hi,

    I can program EPROM's without any problem, I just need a little file for EPROM (27C256). One simple BIN file. It looks like, that this is the first EPROM with SW for machine to operate. And it MUST be 7.07 as shown on picture, 7.05 is no good, because I have all 4 BIN files necessary for SPS plate and I tried to start machine with 7.05, but without success.

  2. #22
    Join Date
    Oct 2016
    Country
    SWITZERLAND
    Posts
    57
    Post Thanks / Like
    Likes (Given)
    17
    Likes (Received)
    17

    Default

    EPROM versions should be written down on a paper glued to aluminium sheet on the right side of D11 box. I just looked, mine unfortunately is quite old, 4.25 for CNC and 4B15 for SPS.

  3. #23
    Join Date
    Jan 2019
    Country
    GERMANY
    Posts
    8
    Post Thanks / Like
    Likes (Given)
    1
    Likes (Received)
    1

    Default

    Unfortunately i have also very old EPROM Versions.

    CNC V4.274/B
    SPS A4B092/93

    "aluminium sheet on the right side of D11 box"

    bildschirmfoto-von-2019-09-07-09-51-38.jpg

  4. #24
    Join Date
    Oct 2016
    Country
    SWITZERLAND
    Posts
    57
    Post Thanks / Like
    Likes (Given)
    17
    Likes (Received)
    17

    Default

    Hi Gloryrates500

    Could you perhaps mail me the EPROM/GAL files that you've read from your machine? Would be a lot easier than to tear my D11 to pieces to dump every EPROM/GAL. I want a backup, just in case my machine breaks down sometimes in the future.

    My mail [email protected]

    Thanks a lot

  5. #25
    Join Date
    Sep 2019
    Country
    SLOVENIA
    Posts
    6
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default

    That's a very, very good idea. Just do it ASAP.

  6. #26
    Join Date
    Sep 2019
    Country
    SLOVENIA
    Posts
    6
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default

    Hi, Viran,
    is there any chance to send me both files for EPROM's with yellow sticker, as shown on your pic? As I explained in another post, I bought new plate SPS, but it is no use, because there is old SW version. Maybe your files are better - I can see number 7 on sticker ?? I am looking for version 7.07. Files should have 32KB.
    BR.

  7. #27
    Join Date
    Sep 2019
    Country
    SLOVENIA
    Posts
    6
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default

    Hi everyone,

    I got firmware version 7.07 for Dialog 11. Deckel FP4a Dialog 11 works again as it should do. So, I have .BIN files (32K) for eprom's on SPS plate version 5 and 7 - for 3 axes machine!

    BR.

  8. #28
    Join Date
    Mar 2016
    Country
    CANADA
    State/Province
    Ontario
    Posts
    102
    Post Thanks / Like
    Likes (Given)
    21
    Likes (Received)
    12

    Default

    Is there a reader for the code or is it mostly in hex? I am looking to rebuild the mill with Linux CNC soon and would prefer to have some ladder layout instead of making my own code up from scratch and educated guesses.
    I do have a complete pinout and labels for each pin.

  9. #29
    Join Date
    Sep 2019
    Country
    SLOVENIA
    Posts
    6
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default

    Hi, Viran,

    sorry, data is available only in HEX.

    BR.

  10. #30
    Join Date
    Dec 2019
    Country
    INDIA
    Posts
    4
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default We repair all Deckel cards in India

    Hi,
    I am Ashok from India,
    Has your NPC 01 problem got solved,we repair this card in India,i have repaired all cards of Deckel
    Dialog Vitran;3288293]After reading a few of the 4,11,12,if you still have any difficulty,please contact me,
    Best regards
    SPS errors, I am likely looking for a reply from Malicron saying I should buy a second Dialog 11 for spare parts. I just have the fourth from the end card with a red error light.


    The batteries were changed and are at 3.7VDC and the machine has been power cycled more than once. There is only one battery pack on the machine which are two wires extending out of the NSV case. I have the parameter files on a CD and backed up a few other places.


    My current course of action is to take everything apart, clean everything again, and put it back together unless someone has a better idea of what I can do to fix this. It is possible that the battery wire disconnected from the right most main board, but highly unlikely. I will look at that when I take the boards out.

    This fault happened between December 20th and December 24th. There were no power surges nor interrupts during that period. My guess is some cap ageing, a small piece of dirt, or something due to it getting cold.

    I am up in Southern Ontario btw.[/QUOTE]

  11. #31
    Join Date
    Dec 2019
    Country
    INDIA
    Posts
    4
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default

    Hi guys,
    I am Ashok from India,Mumbai,
    I have repaired all cards including NPC 01 card,I have testing facilities in my workshop for all your cards mentioned in your communication,
    Just let me know how I can help you,
    My cell no is +91 9821053785


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •