Two years later, I finally got around to making a proper face/mount for the LCD monitor on the D11. Previously I had a standard computer monitor plopped behind the original face...but the original face was a sort of "tunnel" shape that was very difficult to match with satisfactory results. So I ended up taking the monitor apart and extracting just the screen itself and then making a whole nuther face. The only thing that remains from the original is the trim that runs along the outer edge....I had to bandsaw that out.
1/8 inch glass in front of the LCD is more reflective than I would like, but the images are perfectly clear anyway.
1/8 inch glass in front of the LCD is more reflective than I would like, but the images are perfectly clear anyway.