Deckel FP2 number 6770 (with 2 grease nipples on the left side)
I have been looking but have not been able to find anything that describes how (which way) oil comes to the x-axis's lower sliding surfaces.
After the machine has been disassembled, cleaned and wedges have been scraped, it has been put together - but despite an endless pumping with the oil pump, no oil comes from the duct at the X-axis lower sliding surface - oil comes OK from all other places.
Have again dismantled the saddle to investigate why no oil comes. Opened the cover for the drive clutch and notes that the oil channel seems to open out here but no chance to see how or where. If you blow carefully with compressed air in the oil duct, you clearly hear that it opens here - but how should the oil actually get where it should?
Hope there is someone who knows - I'd rather not have to dismantle all gears and clutches just to investigate where the oil channel comes.
Really do not know anything about the machine - bought used a few years ago but I have not used it - stated to be in good condition - but quite the opposite. Has clear traces of previous renovation.
Saij
I have been looking but have not been able to find anything that describes how (which way) oil comes to the x-axis's lower sliding surfaces.
After the machine has been disassembled, cleaned and wedges have been scraped, it has been put together - but despite an endless pumping with the oil pump, no oil comes from the duct at the X-axis lower sliding surface - oil comes OK from all other places.
Have again dismantled the saddle to investigate why no oil comes. Opened the cover for the drive clutch and notes that the oil channel seems to open out here but no chance to see how or where. If you blow carefully with compressed air in the oil duct, you clearly hear that it opens here - but how should the oil actually get where it should?
Hope there is someone who knows - I'd rather not have to dismantle all gears and clutches just to investigate where the oil channel comes.
Really do not know anything about the machine - bought used a few years ago but I have not used it - stated to be in good condition - but quite the opposite. Has clear traces of previous renovation.
Saij