Euro-Mill Registry - Page 2
Close
Login to Your Account
Page 2 of 5 FirstFirst 1234 ... LastLast
Results 21 to 40 of 94
  1. #21
    Join Date
    Apr 2006
    Location
    Wieringermeer, Netherlands
    Posts
    1
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Post

    I am owner of 2 Deckel milling machines which i use for hobby.

    Brand of machine: Deckel
    Series of machine: FP1
    Size of machine: (1)
    Style of machine: lever
    Year of machine: 1955
    Serial number of machine: 31137
    Measuring standard: Metric
    Taper: MT4
    Input voltage: 3-phase 380
    Cabinet style: no cabinet
    Color of machine: green, repaint
    Condition of machine: great
    Major acc's: (Indexer head with 3-jaw chuck and overarm and tailstock with center, DRO Heidenhain Positip VRZ 769 3axle, horizontal overarm, vertical head, lamp (newer), toolmakers tilting table, 4" vice 360 degrees, set collets Deckel, Clarkson Autolock chuck set, etc.)
    Primary use: hobbiest
    City, Country: Wieringermeer, Netherlands
    Comments: Complete and less used machine, type-plates in Dutch

    Brand of machine: Deckel
    Series of machine: FP1
    Size of machine: (1)
    Style of machine: lever
    Year of machine: 1961 (date stamped in cabinet)
    Serial number of machine: 35960
    Measuring standard: Metric
    Taper: MT4
    Input voltage: 3-phase 380
    Cabinet style: with cabinet
    Color of machine: green, repaint
    Condition of machine: great, more used as te machine above
    Major acc's: (Fixed table, vertical head, 4" vice, Clarkson Autolock chuck set, etc.)
    Primary use: hobbiest
    City, Country: Wieringermeer, Netherlands
    Comments: Complete machine, type-plates in German (machine for sale)

  2. #22
    Join Date
    May 2005
    Location
    Wiltshire : England
    Posts
    371
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    5

    Post

    OK, you Deckel guys, move over ...

    Brand of machine: Schaublin
    Series of machine: 13
    Year of machine: 1975
    Serial number of machine: 268861
    Measuring standard: Metric
    Taper: (ISO30 / DIN 2080
    Input voltage: 380-440
    Color of machine: Green
    Condition of machine: Great
    Major acc's: Toolroom table
    High Speed DRilling Head
    Slotting Head
    Dividing Head (Walter)
    Rotary table (Walter)
    Primary use: Hobbiest / Camera & Machine parts
    City, Country: Cotswold Country, Wiltshire UK
    Comments: Just about all the 30 Int. tooling there is but I hate the Collet chucks and use the Schaublin "D" Type 30 Int. collets

    ... and here it is:



    This is my forth trade-up Schaublin 13 and its here to stay

    John

  3. #23
    Join Date
    May 2005
    Country
    CANADA
    State/Province
    Ontario
    Posts
    40
    Post Thanks / Like
    Likes (Given)
    1
    Likes (Received)
    2

    Post

    Brand of machine Deckel
    Series of machine: FP
    Size of machine: 1
    Style of machine: lever
    Year of machine: 1956
    Serial number of machine: 31874
    Measuring standard: imperial
    Taper: MT4
    Input voltage: 220
    Cabinet style: no cabinet
    Color of machine: grey (rough)
    Condition of machine: good
    Major acc's: Boring head, Vertical Head, Slotting Head and Rigid Table
    Primary use: building car parts - hobbiest use
    City, Country: Ontario, Canada
    Comments: Machine came out of the Husky plant in toronto. needs paint and some tuning.


  4. #24
    Join Date
    Aug 2006
    Location
    Louisiana
    Posts
    11
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Post

    Don,t know if this goes in this list, trying to find any information on it.

    PRINCE HUNTER PAL milling machine

    BALDING ENGINEERING LTD.
    SWEET BRIAR ROAD
    NORWICH NOR. 42C.

    Heavy built milling maching, can anyone help with information.

    Will try to take photo this wekend.

  5. #25
    Join Date
    Mar 2003
    Location
    Huntington WV
    Posts
    371
    Post Thanks / Like
    Likes (Given)
    3
    Likes (Received)
    6

    Post

    Brand of machine (Steinel)
    Series of machine: (SV4D)
    Size of machine: (1220 lbs)
    Style of machine: (Verticle mill)
    Year of machine: (sold new in 1958)
    Serial number of machine: (1772)
    Measuring standard: (imperial)
    Taper: (NMTB-30)
    Control model for NC's: ()
    Input voltage: (208-3ph driven by VFD)
    Cabinet style: (no cabinet)
    Color of machine: (grey)
    Condition of machine: (great)
    Major acc's: (Rotary vise, tool holders)
    Primary use: (hobby)
    City, Country: (Huntington, WV USA)
    Comments: (I am the third owner and I have the operators manual. I am also looking for the horizantal model )

  6. #26
    Join Date
    Feb 2001
    Location
    Redwood City, CA USA
    Posts
    4,938
    Post Thanks / Like
    Likes (Given)
    175
    Likes (Received)
    882

    Post


    Brand of machine: Deckel
    Series of machine: FP2NC
    Size of machine: 12 x 12 x 16 travels
    Style of machine: Dialog 4 CNC
    Year of machine: 1986
    Serial number of machine: 2801-1563
    Measuring standard: metric with inch conversion
    Taper: Cat40-NC Stud
    Control model for NC's: Dialog 4
    Input voltage: 220 with a 220:380 transformer
    Cabinet style: ext cabinet (huge)
    Color of machine: green
    Condition of machine: good/great
    Major acc's: Hi-speed vertical head (6300 RPM), plain table.
    Primary use: hobbiest (engine models, parts for machinery restoration), prototyping (various inventions for my emloyer), lab mechanical test fixtures.
    City, Country: SF Bay Area California
    Comments: Other than some issues with intermittent or nonfunctioning pushbuttons, this machine is in very good condition.

  7. #27
    Join Date
    Feb 2001
    Location
    Redwood City, CA USA
    Posts
    4,938
    Post Thanks / Like
    Likes (Given)
    175
    Likes (Received)
    882

    Post


    Brand of machine: Aciera
    Series of machine: F2
    Size of machine: roughly 8 x 6 x 8 travels
    Style of machine: universal
    Year of machine: early 60's
    Serial number of machine: 25180
    Measuring standard: inch
    Taper: W20
    Input voltage: 220 single phase to VFD
    Cabinet style: the base is the cabinet, has lots of tool storage.
    Color of machine: grey
    Condition of machine: good
    Major acc's: universal table, vertical spindle attachment, horizontal overarm, 1/2" & 3/4" horizontal arbors (home made, but very nice), several W20 collets, drill chuck, wrenches, rapid-feed handlevers for all three axes, oil gun, holddown set.
    Primary use: hobbiest (engine models, parts for machinery restoration), prototyping (various inventions for my emloyer), lab mechanical test fixtures.
    City, Country: SF Bay Area, California, USA
    Comments: I purchased this from the "famous" Swiss Precision auction in Palo Alto in 2000(?), where there was also another F2 (with fixed table), an FP?NC, and a Schaublin 13 with all the attachements. I think the purchasers of those machines lurk here occasionally.

  8. #28
    Join Date
    Feb 2003
    Location
    Pittsburgh, PA
    Posts
    262
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    2

    Post

    Make: Deckel
    Model: GK-21
    Year: 1979
    Color: Greenish-Gray
    Motor: .75 HP, 220 Volt, Single Phase

    Pantograph Engraving and Profile Milling Machine
    equipped with :
    6 Deckel clamping straps
    Collet nut wrench
    Spindle face spanner wrench(had to make my own)
    1/4" collet (LOL)
    3D straight-edge bar
    Forming plate attachment
    Copyholder lettering template
    Rough-milling bracket
    Assortment of single lip cutters 1/8-1/2".

    I love this thing

    G

  9. #29
    Join Date
    Jan 2007
    Location
    Maarssen, The Netherlands
    Posts
    3
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Post

    Brand of machine: Deckel
    Series of machine: FP
    Size of machine: 1
    Style of machine: Lever, inside electrics, short X-travel
    Year of machine: Nov. 3, 1953 (customer delivery)
    Serial number of machine: 30046 (machine),4240 (vert.head)
    Measuring standard: Metric
    Taper: MT4
    Control model for NC's: n.a.
    Input voltage: 380V
    Cabinet style: None
    Color of machine: Green, repainted by previous owner
    Condition of machine: Fair
    Major acc's: Universal table, Indexer, Slotting head, Horizontal arm
    Primary use: Live Steam locomotives (3.5"), Tool Making
    City, Country: Maarssen, The Netherlands
    Comments: Working on adding a DRO, based upon chinese digital scales connected to a PC, using a homegrown Java/Eclipse application

    Previously owned an Arboga Drill/Mill, but quickly changed it to this Deckel when it came along.
    Really like this machine.

    Frans

  10. #30
    Join Date
    Aug 2007
    Location
    germany
    Posts
    20
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Post

    Brand of machine: Heckler&Koch
    Series of machine: HF2/56
    Size of machine:
    Style of machine: horizontal and vertical universal mill
    Year of machine: 1980
    Measuring standard: imperial-metric
    Taper: MT3
    Input voltage: 380v
    Cabinet style: small tooling cabinet and electrification cabinet
    Color of machine: original HK Paintshop:Ral 6011 reseda green
    Condition of machine: great, not refurbished
    Major acc's: dividing table, hensoldt optical dividing head, collets,....
    Primary use: hobbiest
    City, Country: Germany



  11. #31
    Join Date
    May 2007
    Location
    Braga - Portugal
    Posts
    1
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Post

    Brand of machine: Graffenstaden
    Series of machine: FU 042
    Size of machine: like Deckel FP2, I guess.
    (X- 42cm Y- 15cm Z- 42cm)
    Year of machine: late 60s
    Serial number of machine: 205154
    Measuring standard: metric
    Taper: MT4
    Input voltage: 380V 3 phase
    Color of machine: original colour green, repainted grey
    Condition of machine: good
    Major acc's: Standard U table
    Primary use: hobbiest, prototyping
    City, Country: Braga, Portugal
    Comments: This mill have stamped in is side the word Angola, the old portuguese colony. I think this one had travel to Africa in the late 60s being returned to Portugal in the early 70s.

    I have searched in the forums and in the web, not finding any information or just a single photo for this Graffenstaden model. Can anyone help me with any kind of information.

    http://i216.photobucket.com/albums/c...ENSTADEN-1.jpg

    http://i216.photobucket.com/albums/c...ENSTADEN-2.jpg

    http://i216.photobucket.com/albums/c...ENSTADEN-3.jpg

    http://i216.photobucket.com/albums/c...ENSTADEN-4.jpg

  12. #32
    Join Date
    Mar 2005
    Country
    UNITED STATES
    State/Province
    Kansas
    Posts
    69
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Post

    Brand of machine Deckel
    Series of machine: FP
    Size of machine: 1
    Style of machine: lever
    Year of machine: ?
    Serial number of machine: 37838
    Measuring standard: imperial
    Taper: MT4
    Input voltage: 220
    Cabinet style: ext cabinet
    Color of machine: repaint
    Condition of machine: good
    Primary use: prototyping
    City, Country: Leawood, Kansas

  13. #33
    Join Date
    Apr 2006
    Location
    Macedonia, Ohio
    Posts
    58
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default

    Brand of machine: Deckel
    Series of machine: FP4NC
    Year of machine: 1986
    Serial number of machine: 2810-4121
    Taper: ISO40
    Control model for NC's: Dialog 4
    Input voltage: 380
    Cabinet style: Tall Cabinet
    Color of machine: Green
    Condition of machine: Exellent
    Major acc's: Universal Table, High Speed Head,Yuasa CPNC Indexer.
    Primary use: (Garage Shop) Prototype, Low Volume Parts.
    City, Country: Macedonia, OH USA
    Comments: Machine came out of Moog NY. Mechanically well maintained. Had some control problems that DD fixed. Scince then this machine amazes me with its accuracy.
    Attached Thumbnails Attached Thumbnails pm-photo.jpg  

  14. #34
    Join Date
    Sep 2004
    Location
    Northern Utah
    Posts
    2
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default

    Brand of machine: Deckel
    Series of machine: FP
    Size of machine: 1
    Style of machine: Lever
    Year of machine: 1953
    Serial number of machine: (optional)
    Measuring standard: imperial
    Taper: MT4

    Input voltage: 220
    Cabinet style: no cabinet
    Color of machine:grey
    Condition of machine: very good
    Major acc's: U table
    Primary use: hobbiest
    City, Country:Long Beach, CA
    Comments: A really smooth running machine

    Brand of machine Aciera
    Series of machine: F
    Size of machine: 2

    Year of machine:Approx 1990
    Serial number of machine: (optional)
    Measuring standard:metric
    Taper: w20
    Input voltage: 220
    Cabinet style: cabinet
    Color of machine: green
    Condition of machine: Almost new
    Major acc's:
    Primary use: hobbiest
    City, Country: Long Beach, CA
    Comments: One of the last!

  15. #35
    Join Date
    Oct 2006
    Location
    williamsburg va
    Posts
    7,882
    Post Thanks / Like
    Likes (Given)
    839
    Likes (Received)
    1741

    Default

    I have an fp1,serial 57835/28. 40 taper,2 dial. Must be 70's from serial number. Have the plain and universal tables,vertical head,indexing head,but no tailstock.Have overhead arm for horizontal,thanks to Sean. The machine was gray,and has been carefully repainted gray. Has the big electrical cabinet. I haven't used the machine yet,but it seems in excellent condition,except for some milling cuts on the plain table,maximum 1/16" deep X 3/8" wide. Universal table unused. Also have a Deckel GK-12 pantograph #4500-1907. No tooling for it except one collet. Also in excellent shape,except for some shallow cuts on the table.

  16. #36
    Join Date
    May 2008
    Location
    Reading UK
    Posts
    185
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default

    Brand of machine Elliott (Gates manufactured)
    Series of machine: Omnimill
    Size of machine: 00
    Style of machine: horiz vertical combo - 1" arbor with 2.25" overarm -1.1Hp vertical 2hp horiz
    Year of machine: 1970 - 1990 ?
    Serial number of machine: (optional)
    Measuring standard: imperial
    Taper: MT3 (vertical) -ISO30 (horiz)
    Control model for NC's: N/A
    Input voltage: 415 3~ converted to 240 3~
    Cabinet style:
    Color of machine: green originally grey
    Condition of machine: good
    Major acc's: Elliott/Victoria Dividing head, Fritzwerner RT , Edgewick Vice
    Primary use: hobbiest
    City, Country: Reading UK
    Comments:


  17. #37
    Join Date
    Dec 2007
    Location
    Russia, Moscow
    Posts
    1
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default

    resize-imgp7625.jpg
    Brand of machine Deckel
    Series of machine: FP1
    Size of machine: 1
    Year of machine: ?? 1940 ??
    Serial number of machine: 17872
    Measuring standard: metric
    Taper: MT4
    Input voltage: 380
    Cabinet style: no cabinet
    Color of machine: grey & repaint
    Condition of machine: fair
    Primary use: hobbiest
    City, Country: Moscow, Russia
    Comments: This machine has worked on a large factory and was sent for scrap metal. I bought it and I will rebuild.

  18. #38
    Join Date
    May 2008
    Location
    Montreal
    Posts
    59
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default Skygrip - FP2 "1959"

    Brand of machine: Deckel
    Series of machine: FP
    Size of machine: 2
    Style of machine: single dial
    Year of machine: '1959'
    Serial number of machine: 46522
    Measuring standard: imperial screws/metric via Acu-Rite DRO
    Taper: Factory SK40
    Control model for NC's: N/A
    Input voltage: 220v
    Cabinet style: No More Replace By: SM VECTOR LENZE AC Tech
    Color of machine: Gray Original
    Condition of machine: Refurbished Completely
    Primary use: (hobbies-prototyping)
    City: Montréal Country: Canada

    Acc's:

    Vertical Spindle Head with Long range Adjustment (FP2) Type 2013, Serial 2484
    1X Over arm (FP2) Serial 46522
    1X Universal table 2229 (FP3) Serial 0594
    1X Universal Table (FP2) Serial 46522
    1X 380 mm rotary table Model: 6017 Serial 72178
    1X 300mm? indexing tab
    1X high speed Boring head (FP2) 2021-1873
    1X Centering scribe
    1X High speed grinding heads
    1X 3 jaw chucks,
    1X V-Block Serial 5350
    2X Vise CNC
    1X FP-2 riser 2225 Serial 0666

    http://s561.photobucket.com/albums/ss59/skygrip/

  19. #39
    Join Date
    Jun 2008
    Location
    Hellendoorn, Overijssel, Netherlands
    Posts
    2
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    1

    Default Abene VHF-2B

    Hello, this is my milling machine.
    Oh, excuse me for my (technical) english.

    Brand of machine: Abene
    Series of machine: VHF
    Size of machine: 2B
    Style of machine: I think it's a lever (don't know what this means)
    Year of machine: 1960/1970
    Serial number of machine: No. 1341
    Measuring standard: Metric.
    Taper: ISO40
    Input voltage: 380 volt
    Cabinet style: No cabinet.
    Color of machine: Blue.
    Condition of machine: Great. Only 747,3 hours.
    Major acc's: Indexing table (schaublin), indexing head (schaublin).
    Primary use: Hobbiest.
    City, Country: Hellendoorn, Overijssel, Netherlands
    Comments: very practical machine to work with, real high quality.
    Other machines: AI hembrug DR1-M, AI hembrug drill press, Philips mig welding machine.

  20. Likes pianoman8t8 liked this post
  21. #40
    Join Date
    Jan 2008
    Location
    Long Beach, California
    Posts
    141
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    1

    Default FP2E Early Machine

    Brand of machine (Deckel)
    Series of machine: (FP2E)
    Size of machine: (2)
    Style of machine: ( two dial )
    Year of machine: (1960')
    Serial number of machine: ( 2205-0142 )
    Measuring standard: (imperial)
    Taper: (SK40 Type : using a two male thread "Pull Stud" inserted onto NT40 draw bar then a CNC Cat40 Special machined Cone inserted that has 5/8"-11 Threads M16 which Can load any ER40 Collets with a NT40-ER-70L Holder or!.
    Input voltage: (440 or 220-380 with a Temco 7KW Phase Converter used with a megnetic starter switch that will shut off all equipment & protects the Converter from starting under load when power is restored.)
    Cabinet style: (Std orginal Elec.Deckel MFG.)
    Color of machine: (Orginal Mouse grey some Chips Touchup: Ral 7005)
    Condition of machine: (all most like new)
    Major acc's: (FVW2 & FVH2 table-OverArm Horz. support - Heidenhain DRO's X500mm,Y200MM and Z400MM -40 Taper TG100 Holder-Horz. Arbors 1", & 3/4", And a 40 Taper Alignment Arbor,)
    Primary use: (hobbiest & Harley Motor Repair)
    City, Country: (Long Beach California USA)
    Comments: (An Early Built machine where the Motor is incased withen and its said that they are the rare Beauty's of all the Deckels that were ever made)
    Last edited by Jon Leyden; 02-24-2009 at 05:24 AM. Reason: Fixup


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •