FP2 (and FP3) attachements interchangeability (old to late models)
Close
Login to Your Account
Results 1 to 4 of 4
  1. #1
    Join Date
    Mar 2015
    Country
    GREECE
    Posts
    493
    Post Thanks / Like
    Likes (Given)
    132
    Likes (Received)
    114

    Default FP2 (and FP3) attachements interchangeability (old to late models)

    Hi to all,

    stemming from Bruce's comment here: Deckel FP2 how to free frozen horizontal quill?

    and doing a lot of daydreaming (it's not illegal to dream, right? ), I was wondering.
    If I ever found the tens of thousands of Euros required, and a machine itself, I would like to have a late square FP2 or FP3.

    Would the attachments that I have with my 500mmX FP2 work?

    I think that tables will fit (it's the first FP3 that have different spacing on the vertical table, but that might only reduce possible positions).

    But what about heads? Would the angular head or the slotting head that I have fit the newer models?

    I think they might, but not sure. Don't have documentation on these newer Deckels as well, a brochure I guess would answer my questions.

    BR,
    Thanos

  2. #2
    Join Date
    Dec 2002
    Location
    Benicia California USA
    Posts
    7,991
    Post Thanks / Like
    Likes (Given)
    1778
    Likes (Received)
    2351

    Default

    AFAIK...all the accessories for the larger family of machines (FP2, FP3) will fit over the entire machine line, first gen through the final "aktive" versions.
    There is no difference between the FP2's and FP3's as to vertical table spacing
    Some were built having only 3 "T" slots (an economy move i suspect) but the overall spacing is the same.....Don't know about the FP4...will await Matt's response on that....
    Same story relative to the accessory use with the FP3NC, FP4NC's. (vertical table spacing on the NC's is different at 63mm c/c)
    The FP2NC is in the same family as the FP1 so if you have an FP1 and its accessories and you want an NC that will use those same accessories then the FP2NC is your machine....
    Believe even the large FP4 will accept the FP2/FP3 accessories, but it requires an accessory shim set for the dovetails....

    Cheers Ross

  3. #3
    Join Date
    May 2001
    Location
    Massachusetts
    Posts
    1,076
    Post Thanks / Like
    Likes (Given)
    20
    Likes (Received)
    113

    Default

    I've run FP2/ FP3 heads on the FP4 (2700 series machine) with the adaper gibs. The t-slots on the FP4 for table mounting and on the tables themselves are both larger width and have larger spacing than the FP2/FP3.

  4. Likes AlfaGTA liked this post
  5. #4
    Join Date
    Mar 2015
    Country
    GREECE
    Posts
    493
    Post Thanks / Like
    Likes (Given)
    132
    Likes (Received)
    114

    Default

    Quote Originally Posted by AlfaGTA View Post
    AFAIK...all the accessories for the larger family of machines (FP2, FP3) will fit over the entire machine line, first gen through the final "aktive" versions.


    Some were built having only 3 "T" slots (an economy move i suspect) but the overall spacing is the same....

    Cheers Ross
    Thanks Ross, that solved a problem I, most probably, will never have to face, but good to know!

    In more real life conditions, I had guessed similarly about the 3 T slots on the early FP3...so, tables fit, but not that many positions to fix them, vertically. Understood

    Thanks
    Br
    Thanos


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •