J Geisler
Plastic
- Joined
- Aug 12, 2007
- Location
- Melbourne Australia
Hello to all,
As the title indicates this is regarding my FP3NC.
The machine has been working until recently.
Currently there is a default NO SIGNAL message showing on the console.
The machine shut down while onder power but was not performing any operation, ie it was idling, spindle stationary.
I have a request for someone to hopefully provide me 2 photos.
1. - Of the LED indicator panel in the control box while the machine is powered up but not performing any function.
And 2. Same panel while the machine is running a program, ie you have a program loaded and you have started a machining cycle.
The picture provided is of the LED indicator panel as referred to.
It was taken with machine under power, in its current condition.
All E'stops are disengaged (out) and all handwheels are in the disengaged (in) position.
Thank you in advance.
Jesse
As the title indicates this is regarding my FP3NC.
The machine has been working until recently.
Currently there is a default NO SIGNAL message showing on the console.
The machine shut down while onder power but was not performing any operation, ie it was idling, spindle stationary.
I have a request for someone to hopefully provide me 2 photos.
1. - Of the LED indicator panel in the control box while the machine is powered up but not performing any function.
And 2. Same panel while the machine is running a program, ie you have a program loaded and you have started a machining cycle.
The picture provided is of the LED indicator panel as referred to.
It was taken with machine under power, in its current condition.
All E'stops are disengaged (out) and all handwheels are in the disengaged (in) position.
Thank you in advance.
Jesse