MAHO MH 400P operators manual
Close
Login to Your Account
Likes Likes:  0
Results 1 to 6 of 6
  1. #1
    Join Date
    Oct 2003
    Location
    india
    Posts
    2
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default

    sirs,
    I have recently bought a secondhand MAHO MH 400P milling machine with Heidenhain TNC 125 control. With great trouble i was able to get the instruction manual of the control, but i am not able to get the instruction manual (literature) of the machine, so will u be kind enough to let me know where on the internet can i down load the literature.

    Thanking you,
    Joseph.

  2. #2
    D. Thomas Guest

    Default

    I never ceased to be amazed at people who just assume that ~everything~ must be "on the internet" somewhere. As it turns out, Heindenhain is one of the very few companies who have many of their older manuals "on the internet", so you were super lucky to even get that.

    The chances of their being ~any~ MAHO manual on the internet are remote, and of ~that particular one~ near impossible.

  3. #3
    Join Date
    Nov 2003
    Location
    Walden, New York, USA
    Posts
    1
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default

    Hi Joseph,

    Even though it's not available on the internet, It is available. I bought a 400P a while back that came with a full set of manuals. Unfortunately, they were all in Italian. However, I was able to get an english version from the US DMG dealer. I'd be happy to send you a copy for the cost of the zeroxing, or you can do a search for DMG and give them a call (If you buy one from them, you'll get the Maho binder with it). If you can't find them, let me know what your email address is & I'll dig up their phone number. If you happen to know Italian, I'll send you one of the two original ones I have.

    Good Luck
    Jon
    [email protected]

  4. #4
    Join Date
    Jul 2001
    Location
    Fullerton, CA USA
    Posts
    2,898
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    13

    Default

    Don, I have learned that there is not as much stuff on the internet as people think there is.

    I ran into this while surfing.

    http://www.mythologic.net/end

    Les

  5. #5
    Join Date
    Apr 2019
    Country
    CROATIA
    Posts
    1
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default

    Dear...

    I bought the used MAHO MH400P without documentation.
    Can you sell me the documentation if you have it

  6. #6
    Join Date
    Jun 2019
    Country
    CZECH REPUBLIC
    Posts
    1
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •