Hi all
My first post here.
My son and I are about to move the recently purchased FP2NC int our workshop. All has to go down a hole (access hatch) of 1020 x 1250 mm hole. To make it worse, the hole can be accessed through a garage, that has only 2140 mm height. The door is even less.
I have installed a hoist attachment point that can handle up to 2000 kg. We have a suitable chain lift (2000kg, some hand winches (900 kg), lifting belts of various lengths, all 3000 kg, ratchet straps, a workshop crane (max 2000 kg) and a pallet trolley.
The parts that need to go down the hole are:
We will shoot a ton of pictures, in order to get it all back together when in the workshop. We have no problem to provide the here
greez chris
My first post here.
My son and I are about to move the recently purchased FP2NC int our workshop. All has to go down a hole (access hatch) of 1020 x 1250 mm hole. To make it worse, the hole can be accessed through a garage, that has only 2140 mm height. The door is even less.
I have installed a hoist attachment point that can handle up to 2000 kg. We have a suitable chain lift (2000kg, some hand winches (900 kg), lifting belts of various lengths, all 3000 kg, ratchet straps, a workshop crane (max 2000 kg) and a pallet trolley.
The parts that need to go down the hole are:
- Main machine, with following part dismounted:
- "Flip head":
- I think the cable on top of the spindle is the power to the spindle motor, am I right?
- I think, removing the flip head should not be too complicated. Just secure it by crane, remove the screws, the guide behind the flip head and it should come off. Am I right?
- splash cabinet, should come off downwards from the table
- standard table, secure by crane, remove screws and we should be done
- handles to manual wheels or wheels as a hole
- x-axis motor, previous owner has done it before and will help, so should be not a big deal
- We might have to till the machine by some 30 to max 45°. Will this cause any problem (oil baths?)?
- complete dialog 4 control system
- Seems to be a major PITA
- There are connectors in the electro cabinet, but none on the machine.
- has anyone done it before?
- "Flip head":
- electro cabinet, I guess, should not be a big issue, as there are connectors
We will shoot a ton of pictures, in order to get it all back together when in the workshop. We have no problem to provide the here
greez chris