For Sale ! ! ! - Page 29
Close
Login to Your Account
Page 29 of 29 FirstFirst ... 19272829
Results 561 to 570 of 570

Thread: For Sale ! ! !

  1. #561
    Join Date
    Apr 2007
    Country
    CANADA
    State/Province
    Ontario
    Posts
    67
    Post Thanks / Like
    Likes (Given)
    13
    Likes (Received)
    5

    Default

    Quote Originally Posted by ballen View Post
    I'm sorry, I sold the faceplate (I think it was actually the rarer 12" = 300mm version) to a guy in the LA area. I also had an FP1 horizontal arm but traded it for some Studer grinder bits. Only thing I have left from my MT4 stuff is this:
    Schraubstockflansch MK4 Teilkopf Deckel Teilapparat / Vise base dividing head | eBay
    If someone here wants it, let me know and I'll pull it off Ebay and offer you a better price.
    Thank you for the offer, I will pass.

  2. #562
    Join Date
    Jan 2003
    Location
    Imlay City, Michigan
    Posts
    2,218
    Post Thanks / Like
    Likes (Given)
    130
    Likes (Received)
    256

    Default

    Quote Originally Posted by happymarius View Post
    Sure, send them.
    Thank you
    My mistake, I have the overarm, not the arbor support.
    img_3637.jpg

    Kevin

  3. #563
    Join Date
    Jul 2005
    Location
    Florida
    Posts
    18
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default

    Deckel FP4 NC For Sale
    I have a beautiful FP4 I'm needing to sell. The machine ran perfectly two years ago when I took it out of service. Now for some reason I cannot get the control to initialize. The unit is a museum piece. Located in Florida. Any reasonable offer accepted. Would make a great machine for retrofit or someone with knowledge of the control might get it going again. Thanks

  4. #564
    Join Date
    Nov 2002
    Location
    St.Louis, Missouri, USA
    Posts
    2,099
    Post Thanks / Like
    Likes (Given)
    128
    Likes (Received)
    474

    Default SK 40 Universal Kwik-Switch set F/S

    100 series master holder with Acura flex-Acura Grip collet chucks to fit Deckel SK 40 spindles with 20 X 2 MM buttress
    thread draw bar F/S. Includes all in the pictures and a set-up block not shown. Asking $250 cash plus shipping cost.dsc00089.jpgdsc00090.jpg

  5. #565
    Join Date
    Jan 2008
    Location
    Cary, NC
    Posts
    283
    Post Thanks / Like
    Likes (Given)
    135
    Likes (Received)
    73

    Default

    Hey Crazykeith,

    Check your PM. I sent you a message.

    Jacques

  6. #566
    Join Date
    May 2001
    Location
    Massachusetts
    Posts
    1,285
    Post Thanks / Like
    Likes (Given)
    50
    Likes (Received)
    237

    Default

    For Sale:
    Wohlhaupter UPA3 boring head. This head is a native Deckel M4 shank (not removeable).
    It has a M4 to 40 taper sleeve adapter which I have never removed. Head is in nice
    shape with original box and all accessories. May be missing a set screw in one or more
    of the extension bars. $850 + shipping.

    20210515_194918.jpg20210515_194928.jpg20210515_194940.jpg

  7. #567
    Join Date
    May 2021
    Country
    MALAYSIA
    Posts
    1
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default Aciera F2

    I know this is an extreme longshot but did you ever sell this machine. If not then I am very interested in buying it from you or for that matter any other Aciera F2 anyone on this forum might be interested in selling
    Regards
    Klaus



    Quote Originally Posted by rklopp View Post
    I hate to break a set (I also have an Aciera F4), but I need the space, and the F2 doesn't get much use. See below for photos. This is a perfect home shop machine - small enough to handle, big enough to do real work, and way, way, way nicer than new Asian for the same money.

    S/N 25180 Made in Switzerland 1960s vintage
    Horizontal and vertical spindle modes with angular adjustment in the vertical mode
    W20 spindle taper with drawbar
    0.8 horsepower
    150-300-600-1200-2400-4800 RPM via three-step pulley and two-speed gearbox
    Infinitely variable motor speed via TECO FM100 variable frequency drive (VFD) (included in sale – runs on 220-V 20-A single-phase circuit)
    X – Y – Z travels (longitudinal x cross x vertical) 8.9” x 4.9” x 8.9” (225 mm x 125 mm x 225 mm)
    Both screw and lever feeds available
    Inch screws and graduated collars
    X – Y – Z backlash 0.003” x 0.002” x 0.007” (screws are like new)
    Two-way tilting angular table 5” x 18” (130 mm x 450 mm)
    Cabinet base with copious storage
    Built-in work light
    Original paint
    Width x depth x height 70” x 44” x 61” (1770 mm x 1120 mm x 1540 mm) (Width is with the doors wide open – width is 31” with the doors shut)
    Weight approximately 600 lb. (275 kg)

    Sale includes:

    W20 collets: 3/32”, 1/8”, 5/32”, 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8” & 3/4”
    W20 long arbors with spacers: 1/2” & 3/4”
    W 20 stub arbor: 1/2”
    W20 arbor blanks: stub 2” and long 1/2”
    Horizontal arbor support
    Vertical spindle attachment
    T-nut and stud clamping set
    Wrenches
    Spare spindle needle bearing
    Operation, Maintenance and Parts Manual (with detailed exploded assembly views)
    Spindle oil gun
    Way oil gun

    $2,400 + shipping. I will strap to a pallet for free. Crating extra. Forklift available for loading.




    More photos in the next post.

  8. #568
    Join Date
    Feb 2001
    Location
    Redwood City, CA USA
    Posts
    5,293
    Post Thanks / Like
    Likes (Given)
    235
    Likes (Received)
    1157

    Default

    Long shot indeed. You missed the F2 sale by a decade.

  9. #569
    Join Date
    Aug 2004
    Country
    GERMANY
    Posts
    1,800
    Post Thanks / Like
    Likes (Given)
    18
    Likes (Received)
    382

    Default Dialog 4 Quick Reference Manual in French

    Pretty good condition, but cover page a bit scratched.
    Greasy and needs cleaning.
    In FRENCH! Will give exotic flair and lifestyle looks to any machine!
    30€
    Attached Thumbnails Attached Thumbnails img_0031.jpg   img_0030.jpg   img_0032.jpg  

  10. Likes ballen liked this post
  11. #570
    Join Date
    Aug 2004
    Country
    GERMANY
    Posts
    1,800
    Post Thanks / Like
    Likes (Given)
    18
    Likes (Received)
    382

    Default BBC Veritron Spindle drive for FP5NC incl. SPS card

    This is the spindle drive out of an FP5NC built in 1985.
    The FP5NC had a variable speed spindle drive combined with a 2 speed gear box. So 2 ranges.
    This is the BBC Veritron part of it, but I also include the NDA90 card out of the SPS (PLC) rack that contains the DA chip to read the signal.
    The chip is the same as in the NRP, but this one has a sticker on it "not for use in NRP53". I do not know why (accuracy class ?).
    I found a good manual for the drive online and can e-mail (I did not note the link, but have the file)

    The Deckel literature calls this out:

    BBC Spindelantrieb AAD 6001C (FP5NC)
    ====================================
    Komplett......................................6005 xx 610103 01
    Netzteil......................................6400 xx 010012 00
    Steuersatz....................................6400 xx 010011 00
    Reglerkarte...................................6400 xx 010010 01
    Feldspeisegerไt...............................6400 xx 010013 00

    I am still parting out the electrical cabinet this thing was in, so drop me a line if you need anything that may be related to the Veritron. I think there is nothing else, but possibly for some small transformers?

    Shipping possible, but while I can commit to bubble wrap it like a Ming vase, shipping is at risk of buyer.

    500€
    win_20210605_10_14_31_pro.jpgwin_20210605_10_14_38_pro.jpgwin_20210605_10_14_55_pro.jpgwin_20210605_10_15_05_pro.jpg

    This functioning machine was parted, because the owner could not sell it complete and wanted it gone (he still has the head, the servos, the table). The cabinet and control look extremely original, not messed up and it seems all the Deckel service updates were performed (incl. all the SW and HW updates in the control).


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •