Deckel Maho DMU50 Collet Removal
Close
Login to Your Account
Results 1 to 3 of 3
  1. #1
    Join Date
    Sep 2015
    Country
    UNITED STATES
    State/Province
    Illinois
    Posts
    32
    Post Thanks / Like
    Likes (Given)
    1
    Likes (Received)
    4

    Default Deckel Maho DMU50 Collet Removal

    Need to remove spindle collets to inspect. Do these come out the bottom?

  2. #2
    Join Date
    Sep 2015
    Country
    UNITED STATES
    State/Province
    Illinois
    Posts
    32
    Post Thanks / Like
    Likes (Given)
    1
    Likes (Received)
    4

    Default

    figured out that these come out from the bottom. a 5mm T-handle is used to loosen the center set screw then the collets can be easily unthreaded from the end of the draw bar.

  3. Likes Dragonkeeper1085 liked this post
  4. #3
    Join Date
    May 2019
    Country
    UNITED STATES
    State/Province
    Arizona
    Posts
    5
    Post Thanks / Like
    Likes (Given)
    2
    Likes (Received)
    0

    Default SK40 Collet info

    14ee6795-2a15-4175-941e-a59d6062cdf9.jpg
    Purchase a collet tool, makes it simple. Make sure you get the dimensions correct, it’s stamped on face of the collet. Most often if German pull stud then 83.5mm but double check.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •