DMG 64v linear, failure to home, X axis error code
Close
Login to Your Account
Likes Likes:  0
Results 1 to 2 of 2
  1. #1
    Join Date
    Sep 2002
    Location
    People's Republic
    Posts
    2,924
    Post Thanks / Like
    Likes (Given)
    212
    Likes (Received)
    2039

    Default DMG 64v linear, failure to home, X axis error code

    Error: C3B0 Motor X does not rotate

    Which is funny because the x axis does not rotate...it is a linear motor....

    anyway, on the odd chance someone had a linear axis DMG machine and has had a failure, I cannot imagine what it is going to cost when a tech come in here and starts swapping parts out.

    Phone support guy says check the motor cable and encoder cable. Schematics are in German...

    History:
    owned since new 2003

    sporadic "axis has moved" errors on startup, since like forever, basically say OK and then enable machine, carefully move it a tad, then restart, "axis has moved" error, but this time with the correct numbers, carry on. Doing that for more than 7 years


    Recently gotten worse, more often, then if you do not reboot the machine instantly it emos and throws an error.

    I am sure there are few of these around, but its worth a try

    back to trying to absorb German wiring diagrams

  2. #2
    Join Date
    Sep 2002
    Location
    People's Republic
    Posts
    2,924
    Post Thanks / Like
    Likes (Given)
    212
    Likes (Received)
    2039

    Default resolution

    Found that this post came up on google, and not the one that actually describes the resolution of the issue:

    DMG Heidenhain absolute scale issues/resolution

    in case anyone trips over it


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •