What's new
What's new

DMG 64v linear, failure to home, X axis error code

gustafson

Diamond
Joined
Sep 4, 2002
Location
People's Republic
Error: C3B0 Motor X does not rotate

Which is funny because the x axis does not rotate...it is a linear motor....

anyway, on the odd chance someone had a linear axis DMG machine and has had a failure, I cannot imagine what it is going to cost when a tech come in here and starts swapping parts out.

Phone support guy says check the motor cable and encoder cable. Schematics are in German...

History:
owned since new 2003

sporadic "axis has moved" errors on startup, since like forever, basically say OK and then enable machine, carefully move it a tad, then restart, "axis has moved" error, but this time with the correct numbers, carry on. Doing that for more than 7 years


Recently gotten worse, more often, then if you do not reboot the machine instantly it emos and throws an error.

I am sure there are few of these around, but its worth a try

back to trying to absorb German wiring diagrams
 








 
Back
Top