DMU 50T Upgradeable ?????
Close
Login to Your Account
Results 1 to 6 of 6
  1. #1
    Join Date
    Dec 2016
    Country
    UNITED STATES
    State/Province
    California
    Posts
    17
    Post Thanks / Like
    Likes (Given)
    28
    Likes (Received)
    14

    Default DMU 50T Upgradeable ?????

    Hello Friends, I have inherited a DMU 50T 1998 it is Millplus and the iron appears very nice.
    It was apparently at NIST before we got it. The CRT is Kaput from what we know. I have had it here 2 1/2 years and have done nothing with it. Have not even powered it up. I spoke to Heidenhain and was told yes it could be brought up to newer spec's and that they try to support Universities..... I was told it would be around the mid $40's to do this. This would kill my budget for the next 3 years.... But if it were to be a nice machine I would do it..... I am an old guy who is in his 60's and have not seen refurbished machines work out very well. But would this be something that might be a nice usable machine if done by someone that knows their stuff. Am I crazy ? I really try to not waste money for taxpayers and for research, I may be able to get the money to refurbish this from a grant as I am being asked for more and more 5 axis work and how much a new 5axis would cost. How fast a machine cuts is not as important to us as is the precision and ability to get the parts machined, I like the size of this machine and would rather spend $50K than $200K on a machine. Thank you for any wisdom you may have. -matt

  2. #2
    Join Date
    Oct 2006
    Location
    Petaluma CA 94952
    Posts
    393
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    40

    Default

    The Millplus control can be upgraded through DMG. I received a quote to upgrade my Millplus V400 DMU50v to V420 for $4500 back in 2016. User installable card and software. If its a VME millplus, you can replace the monitor with a 12" VGA 800 by 600 color LCD. To start, just plug a vga monitor into the EPC8 card VGA port in the back cabinet to see if it even boots. If it gives you a "press F1 or F2 error" and wont boot the OS, the BR2335 bios battery on the EPC8 card is gone and possibly some of the constants. Millplus control is a good control. If its not totally destroyed Id keep it.

  3. Likes UCRmachine liked this post
  4. #3
    Join Date
    Dec 2016
    Country
    UNITED STATES
    State/Province
    California
    Posts
    17
    Post Thanks / Like
    Likes (Given)
    28
    Likes (Received)
    14

    Default

    Thank you, I was looking around at some Documentation I found in the machine, It seems it is a MillPlus CNC PILOT 1290 V330. And could be a 1996 model.
    So I guess I've found a new hobby...... learning to hand program code again. I learned in 86 on a Ikegai lathe and a Cincom, I didn't like it too much so I went back to Building progressive Dies. I was looking at the condition of the machine, the paint is perfect except where the poor guy who was programming wore it away where his hands rested on the control. Thanks again every one, any help is very much appreciated. -mateo

  5. #4
    Join Date
    Oct 2006
    Location
    Petaluma CA 94952
    Posts
    393
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    40

    Default

    If you do get a cam package in the future, check to see if theres a Maho 432 post in the library. Most any post for the Maho Philips 432 or 532 will work ok for at least 4 axis work. You will need to do some editing of the output.(The Millplus control is an evolution of that control).

  6. Likes UCRmachine liked this post
  7. #5
    Join Date
    Jan 2018
    Country
    CROATIA
    Posts
    2
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    1

    Default

    Fusion 360 has both post processors, but the PP for 432 doesn't support more than 3 axis, I don't know about the 532 PP.
    I think this is the PP for his machine (but I'm not 100% sure) : Post for MillPlus

  8. Likes UCRmachine liked this post
  9. #6
    Join Date
    Dec 2016
    Country
    UNITED STATES
    State/Province
    California
    Posts
    17
    Post Thanks / Like
    Likes (Given)
    28
    Likes (Received)
    14

    Default

    Thank you very much for your help ! When we have it running we will post something. -mateo


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
2