redstarworks
Plastic
- Joined
- Nov 21, 2008
- Location
- UK
I am trying to identify the (missing) encoder from the electronic hand wheel on my MAHO MH800W.
Machine details as follows.
MAHO MH800W
1991
Heidenhain CNC234
Handwheel model HR330.002
The Handwheel connects to the control with a D9 connector with only 4 pins used.
The keypad on the unit is connected internally to the encoder with a 10 pin connector.
Please can somebody tell me what encoder this should have, offer me a used one or suggest an alternative.
Thanks,
Alec
Machine details as follows.
MAHO MH800W
1991
Heidenhain CNC234
Handwheel model HR330.002
The Handwheel connects to the control with a D9 connector with only 4 pins used.
The keypad on the unit is connected internally to the encoder with a 10 pin connector.
Please can somebody tell me what encoder this should have, offer me a used one or suggest an alternative.
Thanks,
Alec