What's new
What's new

Excess telescopic way cover wiper for Mori MV40

Totenkopf

Plastic
Joined
May 28, 2021
You know what they say about assumptions. I assumed all the way covers on my MV40 used the same size wiper.

It turns out that I was infact wrong. Subsequently I have a surplus of wiper material, primarily for the Y way covers (probably enough to do two additional machines :angry:) and think I will also have some left over now for the x covers.

If this would be of any use to anyone please let me know. Rubber extrusion only in continuous length. Would like to try get circa 50AUD per meter to recover costs.

Please PM if this would be of any use to you. Can supply profile measurements if that helps.

Cheers!
 
2772A8FC-31BF-4CE5-9DD5-825AEED7A2A7.jpgFED75034-D01F-46F8-92FC-F149633C16B4.jpg0A73EDB8-CEFA-4768-963F-A2D44A25FE69.jpg

Couple of pictures of the Y axis extrusion for reference. I’ve ended up with over 11m of surplus :(

Still overhauling the x covers will report back with any surplus once complete.
 








 
Back
Top