Hello.
We are currently having issues with our Mori Seiki Lathe.
Model: NL2000SY/500
Date: 12/2006
Control : Mitsubishi MSX-850III
The Machine will not reference or move at all when powered up. Using the reference return buttons and the handwheel does not allow the machine to move at all. No error on the screen or the drives. Everything looks good too. I had a spare Drive and swapped it out with the Live tooling drive and same issue is occurring. Manually spinning the tooling spindle shows up on the screen as a speed and gives an abnormal spindle speed alarm.
Any help would be greatly Appreciated
Thanks.
Sean
We are currently having issues with our Mori Seiki Lathe.
Model: NL2000SY/500
Date: 12/2006
Control : Mitsubishi MSX-850III
The Machine will not reference or move at all when powered up. Using the reference return buttons and the handwheel does not allow the machine to move at all. No error on the screen or the drives. Everything looks good too. I had a spare Drive and swapped it out with the Live tooling drive and same issue is occurring. Manually spinning the tooling spindle shows up on the screen as a speed and gives an abnormal spindle speed alarm.
Any help would be greatly Appreciated
Thanks.
Sean