georgetsag
Plastic
- Joined
- Jun 30, 2016
Hello,
I have a problem with the Z axis. I use a dial indicator and the axis moves approximately 0.01mm less per 1 mm of movement. After 10mm of movement it has lost about 0.1mm. The machine has Phillips scales and I have cleaned them. Any idea?
I have a problem with the Z axis. I use a dial indicator and the axis moves approximately 0.01mm less per 1 mm of movement. After 10mm of movement it has lost about 0.1mm. The machine has Phillips scales and I have cleaned them. Any idea?